Anchor3 Station

Single Board Computer with Anchor3

Anchor3 Station is a small single board computer with Anchor3 System-on-Module. This is popularly used for IoT based applications and Industrial equipments by connecting peripherals like sensors, networking, microphone for voice recognition.
You can use several OSs like Tizen, Linux Ubuntu, Yocto etc.
This board provides SPI, I2C, I2S and UART and GPIO as Standard I/O, USB, Ethernet, WLAN/BT for connectivity, Audio/Video In/Out, LED for indicator and User Function, Buttons for Power/Reset/Genreal Purpose, etc.
This can access the on-chip hardware i.e. GPIOs for developing an application. By accessing GPIO, you can connect devices like LED, motors, sensors, etc and can control them too.
This board is only compatible with Anchor 3 SoM module that is ARM based dual core Processor.

– Low Cost and Compact Size
– Included popular connectivity and standard I/O.
– Powerful hardware security options
– Built-in 4-way MIC and ECNR

– IoT Gateway and device.
– Voice recognition and AI speaker
– Home and Industrial automation
– Medical Equipment
– Embedded Products, ….

Multiple OS Support


Anchor3 SoM
Dual core Anchor3 SoM support
Secure Element for secure operation (optional)
WLAN: IEEE 802.11a/b/g/n/ac
Bluetooth: V4.0 + EDR and BLE
Please visit “Embedded & IoT” -> “SoM Module” -> “Anchor3 SoM”

Secure Element and ARM Trust-zone on Anchor3 SoM

Memory & Storage
System memory 512MB DDR3 on Anchor3 SoM
Internal eMMC 8GB on Anchor3 SoM and external Micro-SD card slot

Camera, Display & Touch
Digital RGB display I/F
I2C & USB Touch screen I/F
Digital Video Input for Camera I/F

Voice recognition
PDM MIC interface for Noise canceling
Support Upto 4-ch Digital Mic

WLAN: IEEE 802.11a/b/g/n/ac
Bluetooth: V4.0 + EDR and BLE
10/100/1000 Base-T Ethernet

Standard I/O
I2S Digital Audio(x2), UART(x4), I2C(x1), SPI(x1)
SDIO(x1), PWM(x3), ADC(x2) and GPIOs
LEDs for Indicator & User Test
Reset Button

104 mm x 155 mm

General Features
CPU ARM Cortex-A9 Quad core @ 1.2 GHz
Memory 1GB DDR3 @ 800MHz
Flash Built in 8GB(8bit, 32Gb) eMMC v4.5
OS Tizen 5.5 above, Ubuntu Linux, Android
Secure Secure Element for point-to-point authentication and data transfer
ARM Trust-zone,Secure Boot, Secure JTAG
PMIC Provide all power of Anchor5 Module using onboard bucks and LDOs
B2B Connection Micro Slim Piggy Back Connector
Dimension 56 x 85 mm
Connectivity & I/O
WLAN IEEE 802.11a/b/g/n/ac
Bluetooth V4.1 + EDR and BLE support
Ethernet 10/100 /1000 Base-T Ethernet
USB Support 1xOTG and 1xHost USB
UART Support Max 4xUART
SDIO Support 1x SDIO for SD Memory Card
I2C 1x I2C
Display 4-lane MIPI-DSI up to 1920×1280
HDMI 1.4a up to 1920×1080@60fps
LVDS up to 1280x720p@60fps
Camera MIPI-CSI up to 5M (1920×1080@30fps)
Audio In 1xMIC In
Audio Out 1x Stereo Out, 1x Speaker Out
LEDs Power Status,1x LED
Buttons Power/Reset

Functional Diagram

Mechanical Diagram

Anchor 3 Base Board Specification

Category Description
Ethernet 1000Mbps Ethernet
Audio In/Out put Stereo In/Out phone jack
Power input 5V (Power Jack or USB OTG)
USB Host/OTG USB2.0 Host x2, USB2.0 OTG
MIC input 4 PDM MIC input
SDCARD SD card slot
Buttons DIP Switches, LEDs, Buttons, Jumpers
External I/O Port GPIO, SPI, UART, I2C, I2S, PWM, ADC
Size 85 x 56 mm
Anchor 3 External-I/O Pin Map

PDM MEMS Micro Phone Board Connection